Place of Origin:
Guangdong Province, China
Brand Name:
Gate
Certification:
MSDS, TDS
Model Number:
Rubberized Coating 2L
Stone chip coating is widely used in automotive refinishing and vehicle protection. This 2L protective coating provides a thick elastic layer designed to shield the car underbody and wheel arch areas from stone impact corrosion and road debris. The viscous formulation creates a durable protective barrier that helps reduce vibration noise while improving resistance to moisture and environmental exposure. It is commonly applied in vehicle repair workshops fleet maintenance centers and industrial vehicle protection projects.
Strong Impact Resistance
The coating forms a thick textured layer that helps absorb gravel impact and protects the metal surface from damage.
Anti Corrosion Protection
Creates a protective barrier that helps reduce rust formation caused by water salt and road contaminants.
Noise Reduction Performance
The elastic coating layer can help dampen vibration and road noise from the vehicle chassis.
Good Adhesion to Metal Surfaces
Adheres well to properly prepared steel surfaces commonly found in automotive underbody areas.
Suitable for Workshop Applications
Commonly used in automotive repair centers underbody restoration and maintenance work.
This product is typically used during automotive refinishing processes where underbody protection is required.
| Item | Specification |
|---|---|
| Product Name | Automotive Stone Chip Coating |
| Appearance | Colored viscous liquid |
| Size | 2 Liters |
| Density | Approx 0.87 g cm³ |
| Flash Point | 28°C |
| Boiling Point | 137–142°C |
| Ignition Temperature | 463°C |
| Main Component | Xylene based solvent mixture |
| Material | Resin and solvent mixture |
| Solubility | Soluble in organic solvents such as xylene |
This product contains solvent components and should be handled carefully in industrial environments.
Exposure to vapor during processing may cause dizziness or drowsiness in poorly ventilated environments. Direct contact with skin or eyes should be avoided.
This material is classified as a flammable liquid. Avoid open flame high temperature or sparks during storage and application.
Skin contact
Wash thoroughly with soap and water and remove contaminated clothing.
Eye contact
Rinse immediately with clean running water for at least 15 minutes and seek medical attention if irritation persists.
Inhalation
Move the affected person to fresh air and ensure proper breathing.
Ingestion
Drink warm water and seek medical assistance.
Store the container in a cool and well ventilated warehouse environment. Avoid direct sunlight and keep away from heat sources and open flames. Storage temperature should remain below 37°C. Containers must remain sealed and separated from oxidizing agents acids and alkalis.
Explosion proof lighting and ventilation equipment are recommended in storage facilities. Handling equipment that may generate sparks should not be used.
Stone chip coating is applied to vehicle underbody surfaces to protect metal components from gravel impact corrosion and environmental damage.
Yes the thick elastic coating layer can help reduce vibration and road noise from the chassis area.
It is commonly applied to wheel arches vehicle chassis underbody panels and other exposed metal surfaces.
Yes good ventilation is recommended because the product contains solvent components.
Yes it is widely used in automotive refinishing and vehicle repair facilities.
Proper surface preparation helps achieve better adhesion. Remove grease dust and rust before application. The coating should be applied evenly using suitable spraying equipment or coating tools.
During application ensure that the working environment is well ventilated and avoid sources of ignition.
Send your inquiry directly to us
