Place of Origin:
Guangdong, China
Brand Name:
GATE
Certification:
MSDS, TDS
Model Number:
PTMF Series (S/M/L)
Product Type: Pre-Taped Plastic Masking Film
Available Colors: White / Blue
Main Application: Automotive Refinishing, Body Repair, Paint Booth Masking and Industrial Spraying
Available Sizes: 550mm × 25m / 1100mm × 25m / 1400mm × 25m
Packaging: 100 rolls/box or 50 rolls/box depending on size
OEM / ODM: Available
Pre-Taped Masking Film combines plastic masking film with pre-attached masking tape, creating a convenient two-in-one masking solution for automotive refinishing and spray painting.
Instead of separately positioning masking film and then fixing it with masking tape, technicians can apply the pre-attached tape along the required edge and unfold the film to cover the surrounding area.
This helps simplify masking preparation before:
The product is available in white and blue, with three practical widths for small, medium and large masking areas.
The masking tape is already attached to the plastic film.
Technicians can position the tape along the edge of the area requiring protection and then unfold the film.
This reduces the number of separate masking materials that need to be handled during preparation.
Traditional masking may require:
Measure → Cut Film → Position Film → Apply Tape → Adjust Film
Pre-taped masking film simplifies the process to:
Position Tape → Unfold Film → Cover Area
This can be particularly useful for repair shops handling multiple vehicles or repeated spot-repair jobs.
The folded film expands to provide a substantially larger protected area than the tape width itself.
Depending on the selected size, it can be used for:
| Item | Specification |
|---|---|
| Product Name | Pre-Taped Masking Film |
| Product Type | Automotive Pre-Taped Plastic Masking Film |
| Available Colors | White / Blue |
| Material | Plastic Masking Film + Masking Tape |
| S Size | 550mm × 25m |
| M Size | 1100mm × 25m |
| L Size | 1400mm × 25m |
| S Packing | 100 rolls/carton |
| M Packing | 50 rolls/carton |
| L Packing | 50 rolls/carton |
| Carton Size | Approx. 38.5 × 38 × 34.5 cm |
| Main Application | Automotive Painting & Masking |
| Other Applications | Industrial Spraying, Detailing, Repair Protection |
| OEM / ODM | Available |
| HS Code | 3920109090 |
Note: Actual carton configuration may vary according to product size and packing requirements.
Recommended for smaller masking areas.
Typical applications:
The narrower width makes it easier to control when working around small components.
Designed for medium-sized vehicle areas.
Typical applications:
A practical option for general bodyshop masking work.
Designed for larger-area protection.
Typical applications:
The wider film can reduce the need for multiple overlapping pieces.
The tape and film are combined before use, reducing the need to separately fix the film during masking.
The lightweight film can be unfolded and positioned around vehicle surfaces and larger body areas.
A single roll can cover a large area after unfolding, helping reduce repeated cutting and joining.
The folded roll is compact during storage and expands when required.
The flexible structure allows the masking material to follow vehicle contours and surrounding areas.
Two color options provide flexibility for different product lines and customer preferences.
Cover surrounding body panels while leaving only the repair area exposed.
Protect adjacent glass, interior areas and neighboring panels during spraying.
Mask wheels, wheel openings and surrounding body surfaces before refinishing.
Protect nearby panels and vehicle components during bumper spraying.
The larger M and L sizes can be used for wider-area masking.
Cover automotive glass during body or panel painting.
The S size is suitable for localized component protection.
Pre-taped masking film can be used to help protect non-painted areas from:
It should be selected according to the actual painting process and environmental conditions.
| Comparison | Newspaper Masking | Pre-Taped Masking Film |
|---|---|---|
| Preparation | Cutting and joining required | Film and tape integrated |
| Tape Application | Separate tape required | Pre-attached tape |
| Masking Speed | Relatively slow | Faster preparation |
| Coverage | Multiple sheets often required | Large continuous film |
| Edge Control | More difficult to maintain | Easier to position |
| Moisture Resistance | Paper can soften when wet | Plastic film is less affected by moisture |
| Cleanliness | Paper pieces and dust may be generated | Cleaner masking process |
| Professional Workflow | Traditional temporary method | Designed for professional masking workflows |
| Typical Use | Low-cost temporary masking | Automotive refinishing and repair |
Newspaper can have a lower material cost, while pre-taped masking film is designed to reduce masking labor and preparation steps.
For professional bodyshops, the purchasing decision should therefore consider both material cost and labor efficiency.
Make sure the area where the masking tape will be applied is clean, dry and free from excessive dust, oil or contamination.
Apply the pre-attached masking tape along the edge of the area requiring protection.
Carefully unfold the plastic film to cover the surrounding area.
Make sure the film fully covers the non-painted area and does not interfere with the intended paint boundary.
Where necessary, use additional compatible masking tape to secure loose film edges or complicated areas.
Proceed with the planned spraying operation after confirming that the surrounding areas are adequately protected.
The product is particularly suitable for businesses that perform repeated masking operations.
For daily spot repair, panel refinishing and collision repair.
For masking adjacent vehicle panels and components before repainting.
For preparing vehicles before primer, basecoat or clearcoat application.
For protecting surrounding areas during polishing, cleaning and selected repair operations.
Suitable as a complementary product alongside:
Three widths cover different masking requirements without forcing buyers to use one oversized roll for every job.
Suitable for repeated workshop use and routine masking operations.
White and blue provide flexibility for different markets and product portfolios.
Different carton configurations are available according to roll size.
Suitable for distributors looking to develop their own automotive refinishing consumables range.
The product can be incorporated into a professional masking-product series under the buyer's own brand, subject to MOQ and packaging requirements.
This product should not simply be marketed as "plastic film."
Its stronger B2B positioning is:
Pre-Taped Masking Film for Faster Automotive Paint Preparation
The main purchasing value is the combination of:
Masking Film + Pre-Attached Tape + Large-Area Coverage + Faster Preparation
This makes it particularly relevant to professional automotive refinishing customers who regularly perform masking before painting.
GATE Pre-Taped Masking Film combines flexible plastic masking film with pre-attached masking tape to simplify vehicle masking before painting and refinishing.
Designed for automotive bodyshops, collision repair centers, paint booths and detailing businesses, the product allows technicians to apply the tape along the required edge and unfold the film to quickly cover surrounding areas.
Available in 550mm × 25m, 1100mm × 25m and 1400mm × 25m sizes, it supports small spot repairs as well as larger vehicle masking requirements. White and blue options are available.
The film can help protect windows, headlights, mirrors, adjacent panels, tires and other non-painted areas from paint overspray, sanding dust and workshop contamination.
Compared with traditional newspaper masking, the pre-taped design reduces separate tape application and film positioning steps, helping create a cleaner and more efficient masking workflow.
OEM, ODM and private-label supply are available for B2B customers.
Pre-Taped Masking Film is a plastic masking film with masking tape already attached along one edge. It is designed to simplify masking preparation before automotive painting and other spraying operations.
The main advantage is the integrated tape. Technicians do not need to separately position the film and then apply tape along the edge, which can reduce masking preparation steps.
The current sizes are 550mm × 25m, 1100mm × 25m and 1400mm × 25m. The three widths are intended for small, medium and large masking areas respectively.
The 550mm size is suitable for smaller areas such as headlights and localized repairs. The 1100mm size is suitable for doors, fenders and medium areas. The 1400mm version is better suited to larger panels, roof sections and extensive masking.
The product is available in white and blue. Availability can depend on the specific production and purchasing configuration.
It is intended for masking non-painted areas during automotive refinishing operations. The actual suitability should be evaluated against the specific paint system, booth conditions, temperature and masking duration.
Yes. Additional compatible masking tape can be used where extra fixing or sealing is required, particularly around complicated contours or larger masking areas.
Yes. OEM, ODM and private-label cooperation can be discussed for qualified B2B orders. Packaging, branding and carton requirements should be confirmed according to the order quantity and target market.
Send your inquiry directly to us
