Bossde 2K Pure Black Durable High Gloss Coating 4L Powerful Automotive Refinish Paint

BOSSDE M-206 2K Pure Black is a two component acrylic automotive topcoat designed for vehicle refinishing and metal surface coating. It provides deep black color, stable gloss performance, and reliable durability for both partial repair and full vehicle repainting. The coating forms a dense paint film after curing, making it suitable for workshops, body shops, and industrial metal coating applications.

Deep Black Finish
Provides rich pure black color with strong covering ability and uniform appearance after spraying.

Stable Gloss Performance
Maintains consistent gloss level after curing and polishing, suitable for automotive exterior surfaces.

Good Weather Resistance
The cured paint film resists sunlight, humidity, and temperature changes in outdoor environments.

Strong Adhesion
Adheres well to properly prepared primers and metal surfaces, reducing risk of peeling.

Suitable for Repair and Full Repaint
Can be used for panel repair, full vehicle repainting, and metal component coating.

Compatible with Standard 2K Systems
Works with common 2K hardeners and thinners used in automotive refinishing systems.

• Automotive body repair
• Full vehicle repainting
• Car modification color change
• Metal parts coating
• Equipment surface coating
• Automotive refinishing workshops
• Industrial metal protection coating

Q1 Can this paint be used for full car repainting?
Yes, it is suitable for both full vehicle repainting and panel repair work.

Q2 Does this product require hardener?
Yes, this is a 2K paint and must be mixed with hardener before spraying.

Q3 Can it be applied over primer surfacer?
Yes, it can be applied over properly sanded primer surfacer.

Q4 What spraying method is recommended?
HVLP spray gun or conventional spray gun is recommended for best finish.

Q5 How long before polishing?
Polishing is usually possible after full curing, typically 24 hours depending on temperature.

Q6 Is this paint suitable for metal parts?
Yes, it can be used on metal parts after proper primer application.

• Ensure surface is clean, dry, and sanded before spraying.
• Mix paint and hardener evenly according to mixing ratio.
• Use appropriate thinner depending on temperature conditions.
• Apply 2–3 medium coats for uniform coverage.
• Allow proper flash time between coats.
• Store paint in a cool and dry environment away from direct sunlight.