Bossde 2K International Black Reliable High Gloss Power Coating 1L Automotive Refinish Paint

2K International Black is a two component acrylic automotive topcoat designed for vehicle refinishing and metal surface coating. It provides stable color performance, high gloss appearance, and good resistance to weather and chemicals. This coating is suitable for panel repair, full vehicle repainting, and metal component protection. The product is commonly used in automotive repair workshops, refinishing centers, and industrial coating environments where consistent finish and durability are required.

Stable High Gloss Finish
Provides a deep black finish with consistent gloss after curing, suitable for visible exterior surfaces.

Good Weather Resistance
The cured coating resists sunlight exposure, humidity, and temperature changes, helping maintain color stability.

Strong Adhesion Performance
Works well on properly prepared metal surfaces, primers, and old paint layers after sanding.

Suitable for Spot Repair and Full Repainting
Can be used for panel repair, partial repainting, or complete vehicle refinishing.

Compatible with Standard 2K Systems
Can be used with common 2K hardeners and thinners in automotive refinishing systems.

This product is commonly used in the following areas:

• Automotive panel repair
• Full vehicle repainting
• Car body refinishing workshops
• Metal parts coating
• Anti rust coating for metal components
• Commercial vehicle repainting
• Equipment and machinery surface coating

Q1 Can this paint be used for full car repainting?
Yes it is suitable for both panel repair and full vehicle repainting when used with compatible hardener and thinner.

Q2 Does this paint require primer before application?
Yes for best adhesion and corrosion protection it should be applied over primer surfacer or epoxy primer.

Q3 What application method is recommended?
Spray gun application is recommended for uniform film thickness and smooth surface finish.

Q4 Is this product suitable for metal parts coating?
Yes it can be used on metal parts after proper surface preparation and priming.

Q5 How should the product be stored?
Store in a cool dry place away from direct sunlight and keep the container tightly sealed.

Before spraying, the surface should be cleaned, degreased, and sanded to ensure proper adhesion. Mix the paint with the correct hardener and thinner according to the recommended ratio. Apply in multiple thin layers instead of one thick layer to avoid sagging and improve gloss finish. After spraying, allow sufficient curing time before polishing or assembly.