Bossde 2K International Black Durable Professional Coating 1L Strong Coverage Auto Refinish

2K International Black is a two component acrylic topcoat developed for automotive refinishing and metal surface finishing applications. The coating forms a durable black film with good gloss retention and covering power. It is suitable for automotive repair workshops, repainting projects, and industrial metal coating where a stable black finish and reliable coating performance are required.

High Coverage Performance
The coating provides strong hiding power, allowing efficient coverage over primer surfaces and repaired areas.

Durable Coating Layer
After curing, the paint film shows good resistance to weather exposure and daily wear conditions.

Smooth Surface Appearance
When applied with proper spraying technique, the coating forms a smooth and uniform surface.

Suitable for Automotive Refinishing Systems
Designed for use in standard automotive refinishing processes together with primer surfacer and clear coat systems.

Flexible Application Range
Can be used for vehicle repair, repainting, and metal structure coating projects.

Typical application scenarios include:

• Car body repair painting
• Vehicle refinishing workshops
• Panel repair and repainting
• Full vehicle color refinishing
• Metal frame and parts coating
• Machinery surface coating
• Commercial vehicle repainting

This product is suitable for professional automotive paint shops and industrial coating environments.

Q1 Is this paint suitable for car panel repair?
Yes it is commonly used for automotive panel repair and refinishing work.

Q2 Can it be used on previously painted surfaces?
Yes after sanding and surface preparation it can be applied over old paint surfaces.

Q3 Does this product require baking?
It can air dry under normal temperature or be baked to shorten curing time.

Q4 What surface preparation is required before spraying?
The surface should be cleaned, degreased, sanded, and primed before application.

Q5 Is this product used only for cars?
No it can also be used for metal parts, equipment surfaces, and industrial coating projects.

For best results, apply the paint over properly sanded primer surfacer. Use the recommended mixing ratio with hardener and thinner before spraying. Apply two to three medium coats with appropriate flash off time between coats. Avoid spraying too thick in one pass to prevent sagging and uneven drying. After curing, polishing can be performed if a higher gloss finish is required.