Bossde 2K International Black Professional Durable Coating 1L High Gloss Car Refinish Paint

2K International Black is a professional two component acrylic automotive paint used for car refinishing, repair painting, and metal surface coating. After curing, the coating forms a durable paint film with gloss appearance and good resistance to environmental exposure. The product is suitable for automotive repair shops, repainting centers, and industrial coating applications.

Durable Paint Film
Forms a solid coating layer after curing, suitable for automotive exterior surfaces and metal parts.

Good Gloss Appearance
Provides a clean black finish suitable for visible vehicle surfaces and repainting projects.

Wide Application Range
Can be used for automotive refinishing, metal coating, and equipment painting.

Spray Application Friendly
Designed for spray application with good flow and leveling performance.

Suitable for Workshop Use
Commonly used in automotive refinishing workshops and repainting environments.

The product is commonly used in the following industries and scenarios:

• Automotive repair and refinishing
• Vehicle repainting projects
• Car body panel repair
• Metal parts coating
• Industrial equipment painting
• Fleet vehicle repainting
• Machinery surface finishing

Q1 Is this product suitable for automotive refinishing?
Yes it is designed for automotive refinishing and repair painting applications.

Q2 Can this paint be used on aluminum parts?
Yes it can be used on aluminum surfaces after proper primer treatment.

Q3 How many layers should be sprayed?
Normally two to three layers are recommended depending on coverage requirements.

Q4 Can the surface be polished after curing?
Yes after full curing the surface can be polished to improve gloss.

Q5 Is this product suitable for industrial coating?
Yes it can be used for metal equipment and industrial parts coating.

Surface preparation is very important before spraying. Make sure the surface is clean, dry, and properly sanded. Use the correct mixing ratio and stir evenly before spraying. Apply multiple thin coats rather than one thick coat. After curing, polishing can be done if a higher surface finish is required.