Bossde 2K Black Paint Durable Strong Coverage System 4L Professional Car Refinish Coating

M-208 Blue Phase Special Black is a two component acrylic automotive refinish paint designed for professional vehicle coating and metal surface finishing. The coating forms a dense paint film after curing, providing stable color appearance and reliable surface protection. It is widely used in automotive repair workshops, repainting projects, and industrial metal coating where a uniform black finish is required.

This 2K coating system requires mixing with hardener before application, allowing the paint film to cure through chemical reaction rather than air drying, resulting in improved hardness and durability compared to single component coatings.

High Film Hardness After Curing
The cured coating surface becomes harder and more resistant to scratches and surface wear.

Uniform Color Appearance
The blue phase black formula helps maintain a consistent black tone during panel repair and full vehicle repainting.

Efficient Spray Application
The paint flows smoothly during spraying and helps improve surface leveling.

Suitable for Multiple Substrates
Can be applied over primer surfacer, old paint surfaces, and properly prepared metal substrates.

Good Weather Resistance
Suitable for vehicles exposed to outdoor environments and changing weather conditions.

Typical usage scenarios include:

Automotive body repair refinishing

Complete vehicle repainting projects

Commercial vehicle and truck coating

Metal frame and component coating

Machinery surface painting

Workshop and refinish center operations

This product is mainly used in automotive refinishing environments where durability and color stability are required.

Q1: Is this paint used with hardener?
Yes, this is a two component paint and must be mixed with hardener before spraying.

Q2: Can it be used for motorcycle or metal parts?
Yes, it can be used for motorcycles, metal components, and industrial parts coating.

Q3: How many layers should be sprayed?
Usually 2 to 3 medium coats are recommended depending on coverage requirement.

Q4: Can it be polished after drying?
Yes, after full curing the surface can be polished if necessary.

Q5: How should the surface be prepared before painting?
The surface should be sanded, cleaned, and primed before applying the topcoat.

For better coating performance, mix the paint and hardener according to the recommended ratio and stir evenly before use. During spraying, maintain consistent spray distance and air pressure to achieve uniform film thickness. Avoid spraying in high humidity environments as it may affect drying performance. After use, seal the container properly to prevent material curing inside the can.