Sherwin Williams ATX 1100210V VOC 2K High Gloss Automotive Clear Coat for Car Refinish Paint and Auto Body Repair

For automotive refinishing distributors and professional body shops, clear coat selection directly affects the final appearance of a repaired vehicle.

Sherwin-Williams ATX 1100210V High Gloss Clear Coat is a 2K acrylic polyurethane clear coat designed for professional automotive refinishing.

With a reported solids content of ≥60% and VOC content of ≤420 g/L, this VOC version is positioned for customers who value high-gloss appearance, coating fullness and defined VOC specifications.

Mixed with the compatible 1201224 standard hardener at a 2:1 volume ratio, it can be used for spot repairs, multi-panel repairs and full vehicle refinishing within a compatible coating system.

The reported solids content of ≥60% makes this product suitable for buyers who prioritize coating film fullness and appearance.

When applied under the recommended conditions, it helps create a uniform and visually full transparent finish.

Designed for a high-gloss finish with good surface clarity.

Suitable for enhancing the appearance of compatible solid, metallic and pearl automotive basecoats.

Good leveling supports a uniform coating appearance across repaired panels.

Suitable for doors, hoods, fenders, roofs and multi-panel collision repair projects.

The supplied VOC specification is ≤420 g/L.

A useful option for distributors and workshops that need to evaluate clear coats against specific VOC purchasing requirements.

Final regulatory suitability depends on the destination market and applicable test documentation.

Uses 1201224 standard hardener at a simple 2:1 volume ratio.

This provides a defined mixing reference for professional workshop operations.

The supplied product information indicates support for both air drying and baking processes.

Workshops can evaluate the suitable process according to the official TDS, available equipment and production schedule.

Typical application projects:

• Complete vehicle refinishing
• Multi-panel collision repair
• Door and fender refinishing
• Hood and roof refinishing
• Localized automotive paint repair
• Compatible exterior plastic refinishing systems

For plastic parts, an appropriate plastic repair system and coating compatibility must be confirmed.

Mixing Ratio: 2 Parts Clear Coat : 1 Part Hardener

Examples:

• 1 L ATX 1100210V + 0.5 L 1201224 hardener
• 4 L ATX 1100210V + 2 L 1201224 hardener

1. Prepare the compatible basecoat surface and confirm its flash-off condition.
2. Measure clear coat and hardener at a 2:1 volume ratio.
3. Mix thoroughly and check whether reducer is required according to the official TDS.
4. Apply according to the specified spray settings, coat number and film thickness.
5. Allow the coating to dry or bake under the specified conditions.
6. Inspect the surface and polish when the coating reaches the required curing condition.

Important: Reducer ratio, spray gun nozzle, air pressure, coat number, flash-off time and curing schedule should follow the official product TDS. They are not specified in the current product information.

ATX 1100210V is positioned for professional automotive refinishing customers looking for:

• A Sherwin-Williams branded automotive clear coat.
• A reported high-solids specification of ≥60%.
• A defined VOC specification of ≤420 g/L.
• A 2:1 mixing system with compatible 1201224 hardener.
• High-gloss appearance for professional refinishing work.

Q1: What is the main selling point of ATX 1100210V?

Its main selling points are the reported ≥60% solids content, ≤420 g/L VOC specification, high gloss positioning and 2:1 two-component mixing system.

Q2: Which hardener should be used?

The supplied product information identifies 1201224 standard hardener as the compatible hardener.

Q3: What is the mixing ratio?

The standard ratio is 2:1 by volume: two parts clear coat to one part hardener.

Q4: Is this a high-solids clear coat?

The current product information states a solids content of ≥60%. Buyers should confirm the test basis in the corresponding TDS or test report.

Q5: Is this product suitable for large-area spraying?

It can be considered for large automotive panels, multi-panel repair and complete vehicle refinishing when applied within a compatible coating system.

Q6: Is it suitable for export distribution?

It can be evaluated for professional automotive refinishing distribution. Destination-market compliance and the availability of supporting technical documents should be confirmed before purchase.

Q7: Can I add thinner to adjust viscosity?

Reducer requirements and addition ratios must follow the official TDS. A universal reducer ratio is not provided in the current product information.

Q8: What information is needed for a wholesale quotation?

Please provide the required quantity, destination country, preferred package size and document requirements. Package availability, MOQ, lead time and quotation can then be confirmed.

• Professional spray application requires effective ventilation.
• Keep away from flames, sparks and other ignition sources.
• Use appropriate respiratory protection, goggles and chemical-resistant gloves.
• Follow the SDS for the clear coat and 1201224 hardener. The polyurethane hardener may contain isocyanates.
• Keep both components sealed and stored separately.
• Avoid excessive heat, moisture and direct sunlight.