Product Introduction
High Gloss and Cost-Effective Clear Coat for Daily Automotive Repair
JLTL Royal Shield P180-808 is a 2K hydroxyl acrylic polyurethane automotive clear coat designed for professional body shops and automotive paint distributors.
It combines high gloss appearance, good transparency, weather resistance and practical application characteristics for routine automotive refinishing.
As an MS medium solids clear coat, P180-808 is positioned for customers who need a balance between coating appearance, workshop application requirements and material cost.
The product uses compatible P201-106 hardener and supports seasonal hardener and thinner selection according to application temperature.
Standard package: 5L clear coat + 2.5L hardener = 7.5L total set volume.
Six Reasons to Choose JLTL P180-808
-
High Gloss for Professional Automotive Refinishing
Designed to provide a bright and transparent clear coating finish.
Helps enhance the appearance of compatible automotive solid, metallic and pearl basecoats.
-
MS Medium-Solids Positioning
A practical choice for workshops and distributors looking for a medium-solids clear coat for routine refinishing operations.
Balances application needs, surface appearance and purchasing cost.
-
2K Acrylic Polyurethane Technology
Uses a hydroxyl acrylic resin system with compatible P201-106 hardener.
The two-component system forms a crosslinked transparent coating film after proper mixing and curing.
-
Weather Resistance and Gloss Retention
Designed with weather resistance and gloss retention as important product characteristics.
Suitable for general automotive exterior refinishing. Actual long-term performance should be evaluated through product-specific test data.
-
Seasonal Hardener and Thinner Options
Different drying-speed options can be selected according to workshop temperature and application conditions.
Helps professional painters adapt the coating process to different seasons.
-
7.5L Standard Set for Workshop Consumption
The standard package includes 5L clear coat and 2.5L hardener.
Suitable for automotive repair shops, aftermarket distributors and wholesale buyers handling regular refinishing demand.
Recommended Customer Groups
| Customer Group |
Purchasing Needs |
Product Application |
| Automotive Paint Distributors |
Regular supply of refinishing clear coat |
Wholesale distribution |
| Auto Body Shops |
Daily repair and repainting materials |
Spot and panel repair |
| Collision Repair Centers |
Clear coat for accident repair |
Multi-panel refinishing |
| Paint Shops |
Consistent workshop coating materials |
Routine vehicle repainting |
| Automotive Paint Wholesalers |
Cost-effective MS clear coat |
Aftermarket supply |
Main Application Areas
Automotive Spot Repair
Suitable for door scratches, fender repairs, localized accident damage and other routine body shop jobs.
Automotive Body Panel Refinishing
For compatible hoods, doors, fenders and bumper refinishing projects.
Motorcycle and Electric Vehicle Parts
Can be evaluated for compatible motorcycle exterior panels, electric vehicle body parts and other appearance coating applications.
General Vehicle Repainting
Suitable for evaluation in general vehicle repainting projects according to spray area, workshop equipment and supporting materials.
For premium full-vehicle refinishing or projects requiring especially high DOI and large-area leveling, conduct a spray-out comparison before selecting the product.
Product Specifications
| Item |
Specification |
| Brand |
JLTL |
| Series |
Royal Shield |
| Model |
P180-808 |
| Product Name |
High Gloss MS Clear Coat |
| Product Category |
Automotive Refinishing Clear Coat |
| Resin System |
2K Hydroxyl Acrylic Polyurethane |
| Solids Classification |
MS / Medium Solids |
| Finish |
High Gloss |
| Main Features |
Transparency, Weather Resistance, Gloss Retention |
| Compatible Hardener |
P201-106 |
| Mixing Ratio |
100:50:5–15 |
| Application |
Automotive Refinishing |
| Drying Methods |
Air Drying / 60°C Baking |
| Clear Coat Package |
5L |
| Hardener Package |
2.5L |
| Total Set Volume |
7.5L |
| Reference Shelf Life |
24 Months at 20°C under specified storage conditions |
| HS Code |
3208909010 |
Mixing Ratio and Application Guide
Recommended Mixing Reference
Clear Coat : Hardener : Thinner = 100 : 50 : 5–15
- Clear coat: JLTL P180-808
- Hardener: Compatible P201-106
- Thinner: Select a compatible option according to temperature and TDS
Confirm the weight or volume measurement basis before mixing.
Basic Application Steps
- Prepare the basecoat and confirm the required flash-off condition.
- Mix clear coat, hardener and thinner according to the specified ratio.
- Filter the mixed coating with a suitable paint filter.
- Apply 2–3 coats according to the recommended process.
- Allow approximately 5–10 minutes between coats as a reference.
- Choose air drying or 60°C baking according to the TDS.
- Polish only after the coating has sufficiently cured.
Reference baking preparation: Allow approximately 8–12 minutes before baking, subject to the manufacturer's technical instructions.
Seasonal Application Flexibility
Different workshop temperatures require different solvent evaporation and curing speeds.
P180-808 can be paired with appropriate hardener and thinner options according to the application environment.
| Season / Condition |
Recommended Selection Direction |
| Winter / Low Temperature |
Fast drying combination |
| Spring and Autumn / Normal Temperature |
Standard combination |
| Summer / High Temperature |
Slow drying combination |
Actual product model numbers and temperature ranges should be confirmed before ordering.
The selection should also consider humidity, airflow, panel temperature and spraying area.
P180-808 MS Clear Coat vs. HS Clear Coat
| Item |
P180-808 MS Clear Coat |
HS Clear Coat |
| Solids Category |
Medium Solids |
High Solids |
| Main Positioning |
Routine professional refinishing |
Higher solids application requirements |
| Application |
Depends on product formulation |
Depends on product formulation |
| Appearance |
High gloss positioning |
Product specific |
| Purchasing Consideration |
Practical cost and daily workshop consumption |
Solids level and specific application requirements |
Packaging and Wholesale Information
Standard Package
<Package Details>
- P180-808 Clear Coat: 5L
- P201-106 Compatible Hardener: 2.5L
- Total Set Volume: 7.5L
</Package Details>
Suitable for B2B Buyers
- Automotive paint distributors
- Automotive refinishing wholesalers
- Professional body shops
- Collision repair material suppliers
- Automotive aftermarket coating dealers
Information to Confirm Before Ordering
| Purchasing Item |
Information |
| Product Model |
P180-808 |
| Compatible Hardener |
P201-106 |
| Standard Set |
5L + 2.5L |
| Seasonal Hardener Options |
Confirm available models |
| Compatible Thinner Options |
Confirm available models |
| Carton Packing |
Clear Coat 5L*4
Hardener 固化剂2.5L*8 |
| Carton Dimensions |
Clear Coat 36.5*23*30.8cm
Hardener 36.5*23*33.4cm |
Frequently Asked Questions
Q1: What is JLTL Royal Shield P180-808?
It is a 2K hydroxyl acrylic polyurethane MS high-gloss clear coat for professional automotive refinishing.
Q2: Which hardener is compatible with P180-808?
The supplied compatible hardener is P201-106.
Q3: What is the mixing ratio?
The supplied reference ratio is 100:50:5–15 for clear coat, hardener and thinner. Confirm the measurement basis and final application requirements through the official TDS.
Q4: Can it be used over metallic and pearl basecoats?
Yes, when the basecoat is compatible and has reached the required flash-off condition.
Q5: Can I use it in summer?
Yes. Select an appropriate slow-drying hardener and compatible thinner according to actual temperature and workshop conditions.
Q6: Does it support air drying and baking?
The supplied information indicates both air drying and 60°C baking options. Follow the official TDS for exact drying conditions.
Q7: What is the standard package size?
One standard set contains 5L clear coat and 2.5L hardener, with a total volume of 7.5L.
Q8: What is the product shelf life?
The supplied reference shelf life is 24 months under specified storage conditions at 20°C for unopened original packaging. Please confirm the actual product label and storage requirements.
Storage and Safety
- Use in a properly ventilated professional spray area.
- Keep away from flames and ignition sources.
- Wear suitable respiratory protection, goggles and chemical-resistant gloves.
- Follow the actual SDS for the clear coat, hardener and thinner.
- The polyurethane hardener may contain isocyanates and requires appropriate professional protection.
- Keep all components sealed and store in a cool, dry and ventilated area.
