Place of Origin:
Guangdong Province，China
Brand Name:
Gate
Certification:
MSDS, TDS
GATE 1K Aerosol Rubberized Undercoating is a 700 ml ready-to-spray automotive protective coating for localized underbody, wheel-arch, side-skirt, and inner-fender repair. The single-component aerosol format requires no hardener, spray gun, or air compressor. It helps recreate a textured protective finish while supporting stone-chip, moisture, corrosion, wear, and road-noise reduction performance.
GATE 1K Aerosol Rubberized Undercoating is a fast-drying, single-component aerosol coating developed for automotive maintenance and localized refinishing work.
The product is supplied in black and white versions. After application, the coating forms a rubberized textured layer commonly used on vehicle underbodies and other road-exposed areas. Its aerosol design makes it practical for workshops carrying out small repairs, body shops restoring damaged stone-chip texture, retailers serving DIY users, and distributors seeking an easy-to-use automotive repair SKU.
What is GATE 1K Aerosol Rubberized Undercoating?
GATE 1K Aerosol Rubberized Undercoating is a 700 ml single-component aerosol coating used to apply a textured, rubberized protective layer to automotive underbody and wheel-area surfaces.
What is GATE 1K Aerosol Rubberized Undercoating used for?
The product is used for localized protection and texture restoration on wheel arches, underbodies, side skirts, inner fenders, lower door edges, trunk floors, and related vehicle areas exposed to water, grit, and road debris.
No hardener is required before use.
→ Reduces preparation steps for local repair work.
→ Helps workshops complete small jobs without managing mixed materials or leftover product.
The aerosol can is ready for direct spraying.
→ Supports flexible use in workshops, mobile repair situations, retail service counters, and DIY applications.
→ Lowers equipment dependence for distributors and end users.
The product is positioned as a fast-drying coating for repair and touch-up work.
→ Helps reduce waiting time during local underbody restoration.
→ Supports more efficient repair scheduling.
The coating can form a particulate, textured finish when applied in multiple thin coats.
→ Helps restore the visual character of OEM-style underbody or wheel-arch protective areas.
→ Adds value in collision repair and vehicle refurbishment work.
The coating creates a flexible protective film.
→ Helps reduce direct impact from small stones, moisture, and road contamination.
→ Supports underbody maintenance in areas exposed to road conditions.
Suitable for vehicle zones that experience abrasion and moisture exposure.
→ Helps provide an additional barrier on properly prepared surfaces.
→ Useful for repair shops handling underbody touch-up and restoration work.
Available in black and white.
→ Supports conventional dark underbody work as well as light-colored vehicle or component repairs.
→ Helps distributors cover more repair scenarios with two practical color options.
Product system: 1K aerosol coating
Hardener: Not required
Application equipment: Integrated aerosol spray nozzle
Compressed air / spray gun: Not required
Typical repair role: Protective texture coating after surface cleaning and preparation
| Performance Area | Product Information |
|---|---|
| Product type | 1K single-component aerosol coating |
| Coating character | Rubberized textured protective layer |
| Drying approach | Solvent evaporation |
| Application method | Direct aerosol spraying |
| Texture effect | Granular / stone-chip style texture |
| Stone-chip protection | Helps reduce direct impact from road debris |
| Moisture protection | Supports protection in wet and humid exposure areas |
| Corrosion protection | Helps provide an additional protective barrier on properly prepared surfaces |
| Abrasion resistance | Intended for road-exposed automotive areas |
| Noise reduction | May help reduce stone-impact noise in treated areas |
| Topcoating | Confirm compatibility and full curing requirements before applying paint |
Suitable for areas exposed to gravel, sand, water, and road debris. The textured rubberized finish helps restore protective appearance after local repair.
Suitable for underbody edges and localized damaged protection zones where an additional stone-chip and moisture barrier is needed.
Useful for restoring textured protective surfaces on lower body areas exposed to road splash and abrasion.
Suitable for inner fender repairs where stone impact and moisture exposure are common.
Can be used for localized protection of lower door-edge zones when surface preparation is completed correctly.
Suitable for selected trunk-floor protection and restoration applications where a textured coating is required.
Useful after panel repair where the original textured underbody coating needs to be visually restored.
The integrated aerosol format makes the product suitable for smaller non-production repairs where no spray gun is available.
Confirmed substrate compatibility is To Be Confirmed.
Before application, the target surface should be clean, dry, degreased, and free from loose rust, loose old coating, and contamination. For bare metal, repaired corrosion areas, or unknown coating systems, buyers should confirm the correct primer or preparation method before use.
| Comparison Item | GATE 1K Aerosol Undercoating | 2K Polyurethane Bedliner-Type Coating |
|---|---|---|
| System | Single-component | Two-component chemical cure |
| Use method | Ready-to-spray aerosol | Resin and hardener are mixed before application |
| Equipment | No gun or compressor required | Usually requires Schutz gun, HVLP gun, or related equipment |
| Operation | Simple, suitable for localized work | More professional preparation and application required |
| Drying mechanism | Mainly solvent evaporation | Chemical crosslinking |
| Film strength | Moderate | Generally higher |
| Scratch and abrasion resistance | General to moderate | Commonly stronger |
| Chemical resistance | General | Commonly stronger |
| UV resistance | Depends on formula | Bedliner-type systems are commonly stronger |
| Typical use | Small repairs, wheel arches, local underbody protection | Pickup beds, off-road vehicles, larger-area protection |
| Cost | Lower | Higher |
| Maintenance convenience | High | Lower than aerosol systems |
Who should choose the 1K aerosol option?
Buyers needing quick, convenient, local underbody or wheel-arch repair without spray equipment should consider the 1K aerosol format.
Who should choose a 2K polyurethane coating instead?
Buyers requiring higher film strength, heavy-duty abrasion resistance, or large-area protection should evaluate a 2K polyurethane system.
Prepare the surface
Remove loose rust, loose paint, dirt, oil, wax, water, and dust. Ensure the surface is dry.
Mask surrounding areas
Protect adjacent painted panels, trim, brake components, tires, and areas not intended for coating.
Shake the can thoroughly
Shake for approximately 45–60 seconds after the mixing ball can be heard.
Apply the first thin coat
Hold the aerosol approximately 15–25 cm from the surface and spray a thin initial layer.
Build texture gradually
Allow approximately 10 minutes between coats, then apply the second and third coats as needed to build texture and coverage.
Allow adequate curing
Drying and full-cure conditions are To Be Confirmed. Avoid exposing the coating to severe abrasion or moisture before it has dried adequately.
Clean the nozzle after use
Turn the aerosol can upside down and spray for 2–3 seconds to reduce nozzle blockage.
Always refer to the latest product TDS before professional application.
| Item | Specification |
|---|---|
| Product Name | GATE 1K Aerosol Rubberized Undercoating |
| Alternative Product Name | GATE 1K Aerosol Stone Chip Coating |
| Brand | GATE |
| Product Type | Fast-drying rubberized textured protective coating |
| System | 1K single component |
| Packaging Form | Aerosol spray can |
| Volume | 700 ml |
| Color | Black / White |
| Main Use | Underbody protection, stone-chip protection, wear protection, corrosion-supporting protection |
| Application Method | Direct aerosol spraying |
| Spray Equipment | Not required |
| Hardener | Not required |
| Mixing Ratio | Not applicable |
| Reducer Requirement | Not applicable |
| Solid Content | To Be Confirmed |
| VOC | To Be Confirmed |
| Flash-Off Time | Approximately 10 minutes between coats, based on supplied application guidance |
| Full Drying / Curing | To Be Confirmed |
| Pot Life | Not applicable |
| Shelf Life | To Be Confirmed |
| Country of Origin | To Be Confirmed |
| Recommended HS Code | 3208909090 |
| Item | Information |
|---|---|
| Unit Size | 700 ml aerosol can |
| Units per Carton | 24 cans |
| Carton Dimensions | 40.5 × 27.5 × 30 cm |
| Net Weight | To Be Confirmed |
| Gross Weight | To Be Confirmed |
| Carton CBM | Approximately 0.0334 m³ |
| Pallet Option | To Be Confirmed |
| MOQ | To Be Confirmed |
| OEM Packaging Option | To Be Confirmed |
| Dangerous Goods Shipping Classification | To Be Confirmed; aerosol products may require specialized transport handling |
Automotive Paint Distributors
A practical add-on SKU for underbody repair, collision repair, and fast local restoration.
Body Shop Supply Wholesalers
Suitable for customers needing a no-equipment aerosol solution for stone-chip texture restoration.
Collision Repair Workshops
Useful for wheel arches, lower-body areas, inner fenders, and local underbody coating repairs.
Auto Repair Retailers
The ready-to-use format is suitable for customers handling maintenance and minor repairs.
Importers and Private-Label Buyers
Potentially suitable for private-label development subject to confirmation of OEM, MOQ, and packaging capabilities.
OEM, private-label services, label customization, carton customization, mixed-product orders, samples, distributor pricing, export documents, TDS availability, SDS availability, and MOQ are To Be Confirmed.
Buyers should confirm the following before ordering:
GATE 1K Aerosol Rubberized Undercoating is intended to create a textured protective coating for road-exposed areas. It is not a standard gloss finishing paint.
Yes. The product is supplied as a ready-to-use aerosol can and does not require a separate spray gun or air compressor.
No. GATE 1K Aerosol Rubberized Undercoating is a single-component product and does not require a separate hardener.
Black is generally suitable for conventional underbody, wheel-arch, and dark protective coating repairs. White can be considered for light-colored vehicles, white components, or applications requiring a lighter appearance.
Loose and active rust should be removed and the surface properly prepared. The correct treatment or primer system for rusted metal should be confirmed before application.
Topcoating compatibility is To Be Confirmed. Some rubberized coatings may require full curing and may not be suitable for direct topcoating. Check product instructions before applying paint.
The product is packed at 24 aerosol cans per carton. Carton size is 40.5 × 27.5 × 30 cm.
OEM and private-label availability is To Be Confirmed. Please request details regarding MOQ, artwork requirements, packaging options, and lead time.
Send your inquiry directly to us
